Mitutoyo 547-258SCAL Absolute Digimatic Depth Gauge with Calibration, Inch/Metric, Indicator Type, 4″ x 0.63″ Base, 0-8″ (0-200mm) Range, 0.00005″ (0.001mm) Resolution, +/-0.0003″ Accuracy

Categories: ,

Description

Range:0-8 inches  |  Resolution:0.00005 inches  |  Measurement accuracy:+/- 0.0003 inches  |  Part Number:547-258SCAL

The calibrated Mitutoyo 547-258SCAL Absolute Digimatic digital depth gauge is for measuring the depths of holes and other depressions. It has a measurement range of 0 to 8.0″ (0 to 200mm), a resolution of 0.00005″ (0.001mm), and an accuracy of + or – 0.0003″. The LCD screen displays measurements in inches and metric units. This unit comes with a carbide-tipped contact point and four extension rods (0.5″, 1″, 2″, and 4″) for flexibility in measuring range. The base of this gauge is 4 x 0.63 inches (W x D) for stability, and is hardened, ground, and lapped for accuracy. (W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo’s American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.

Additional functions for this indicator include origin set, zero set, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. This unit has a 3/8″ diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. The measuring force is 1.5 Newtons (N) or less. It has a battery life of approximately 3.5 years of normal use. This unit comes with a SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records. This model comes in a fitted plastic case.

Specifications
Range 0 to 8.0″ (0 to 200mm)
Resolution 0.00005″ (0.001mm)
Accuracy + or – 0.0003″
Base flatness 0.00008″f
Stroke 0.5″
Measuring force 1.5N or less
Stem #4-48 UNF contact point thread mount with 3/8″ diameter stem
Face LCD displays in both inches and metric units
Extension rods Four (0.5″, 1″, 2″, and 4″)
Data output Yes
Dimensions 105 x 59mm (H x W)
Weight 340g
Power source SR-44 battery (included)

H is height, the vertical distance from the lowest to highest point with stem at rest; and W is width, the horizontal distance from left to right.

Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.

Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

What’s in the Box?

  • Mitutoyo 547-258SCAL depth gauge
  • Contact point
  • Extension rod, 0.5″
  • Extension rod, 1″
  • Extension rod, 2″
  • Extension rod, 4″
  • SR-44 battery
  • Plastic case
  • Certificate of Calibration

Make sure this fits by entering your model number.
Calibrated depth gauge measures 0 to 8.0″ (0 to 200mm) with 0.00005″ (0.001mm) resolution and + or – 0.0003″ accuracy, for measuring the depth of holes and other depressions
LCD screen of the indicator (Mitutoyo 543-392B) displays measurements in inches and metric units and unit has a flat back for stem/plate mounting
Comes with a carbide-tipped contact point and four extension rods (0.5″, 1″, 2″, and 4″) for flexibility in measuring range
Base is 4 x 0.63 inches (W x D) for stability, and is hardened, ground, and lapped for accuracy
Includes a Mitutoyo Certificate of Calibration that the tool has been calibrated, and meets the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories

Additional information

Measurement Accuracy
Part Number
Domestic Shipping
International Shipping
Item model number
Brand

Reviews

There are no reviews yet.

Be the first to review “Mitutoyo 547-258SCAL Absolute Digimatic Depth Gauge with Calibration, Inch/Metric, Indicator Type, 4″ x 0.63″ Base, 0-8″ (0-200mm) Range, 0.00005″ (0.001mm) Resolution, +/-0.0003″ Accuracy”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.