100pcs Multi-Purpose 3” Double Ended Cleanroom Lint Free Cleaning Swabs with Small Pointed Foam Tips Cleaning for Tiny Tight Space of Precision Component
👉CK-FS750DH Small sharp tip foam cleaning swab is constructed from compressed 100 ppi (Z) open-cell polyurethane foam securely bonded to a 100% polypropylene shaft that is free from organic contaminants such as silicone, amides or phthalate esters.
👉It doesn’t leave the residue behind stuff like regular cotton swabs do. Not falls off, stays together perfectly.
👉Cleanroom Foam cleaning Tips are more suitable for deeper cleaning of articles with high cleanliness requirements.
👉Excellent as PCB board swabs, gun/firearm swabs, camera sensor swabs, optical lens swabs, , microscopes swabs, electronics swabs, jewelry swabs, painting swabs, arts&crafts swabs, ect.
-High quality, Lint-Free & Fiber Free.
-Soft and non-abrasive tip.
-Free from silicone, amide and DOP.
-Low non-volatile residue.
-Low in both particles and ion content.
-Excellent solvent-holding capacity.
-Compatible with most common solvents.
-No contaminating adhesives or coatings.
-Foam securely thermally bonded to a polystyrene shaft, refuse to fall off.
-Polyproylene handle provides good control and excellent balance of flexibility, refuse to break.
-laboratory optical equipmen cleaning.
-Used in the cleaning static sensitive components or parts.
-Remove flux residue and excess material.
-Effectively clean small slotted, recessed and hard to reach areas.
-Watch &clock repair kit.
-Fishing reels cleaner kit.
-Engine Oil Excess Contaminant Remover.
-General purpose cleaning.
✅ If you are not satisfied with product quality, We promise to refund or replacement.
✅ More cleanroom foam tip swabs / polyester tip swabs / microfiber tip swabs please visit our 👉【Cleansky Storefront】
Make sure this fitsby entering your model number.
✅ Highest quality Open-Cell foam tip swabs, CK-FS750 Small pointed tip foam swab designed for removal of contamination from surfaces in cleaning of tiny hard to reach area, features excellent particle and entrapment and retention; enables access to very small areas and crevices. Especially in tiny places for removing flux and adhesive tape and excess dust engine oil contaminant and leave without dust and lint.
✅ The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an Class 100 Cleanroom, The foam exhibits low particles and ion content.free from silicone, amide and DOP.
✅ It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity that enables the swabs to resis corrosion during the cleaning, enabling fast absorption of contaminants onto the swab head.
✅ Competent as camera sensor cleaning swabs, optical lens cleaning swabs, printed circuit board cleaning swabs, electronics cleaning swabs, jewelry cleaning swabs, arts&crafts cleaning swabs, painting cleaningswabs, gun/firearm cleaning swabs, watch &clock cleaning swabs, fishing reels cleaning swabs ect.
✅ More models of cleanroom foam swabs and cleaning solutions please visit our 【Cleansky】